Looking to buy Sander and have no idea what you need? Or you know what you need, but do not know what features to look for?

Here is the list of the eight different types of sanders on the market, you can also see the palm sander post here, what everyone uses and what features you should look for in a sander.

Do you know that they manufacture electric sanders for drywall? and drywall sanders have dust collection ties? ~ Hoooyah! sweet cure!

  1. Belt sanders range in size from 1 “sanders to 37” wide, 15 HP self-supporting sanders. The most commonly used belt sander is 3 “x 21” (referred to as belt size). The characteristics of the sander of a belt include the output of the DB motor (for noise), mechanical balance, the location of the handle to the speed control switch, the type of plate for a flat sanding and dust collection.
  2. Disc and belt sanders are combinations of machines mainly in wood sanding shops, mainly plastics and non-ferrous metals. With a belt and a disc, the sander searches for features such as the size of the sanding disc and the required belts, the table tilt mechanism, the HP motor, the ease of changing the belt and whether the sander has a followed by the belt.
  3. Disc sanders are measurable from a 5 “portable sander to work on site, using a 20”, 3-pc. Or 3-inch rack-mounted sander for the store. Find the ease of changing the drive, the size of the motor required for your job type, the convenience of aligning the strap, storing the keys and collecting dust when purchasing a disc sander.
  4. Drum sanding machines work to flatten, smooth, finish and polish. A drum sander can be used in place of a wood planer to finish the stock, but not as a planer, removing sniping at the end of your wood. The features that will be found on the drum sander are the frequent belt changes, dedusting, engine HP, and clutter. Click and see the palm sander post here.
  5. End Sanders or Sanders are used for the last little sanding in your fine woodwork. Find OPM (oscillations per minute) for fine sanding, variable speed motor, ergonomic handle designed for convenience and dust bag collection when choosing the right finishing sander.
  6. Random Orbit Sanders are used to stripping paint tools, prepare new castings, clean between finishes and clean and clean metal and composite materials such as a solid countertop. Random orbit sanders have a unique double movement: the sandpaper disk rotates in a circle while the entire block moves in a round loop, giving free rotation, even when compared to grain. Random orbits work faster than vibrating sanders but do not eliminate more material. For this type of work, see belt sanders for flat surfaces, disc sanders for curves. When choosing a random orbit sander, look for the size of the motor, the body setting and the size of the pad (5 or 6 inches) applicable to your job. Make sure that the orbital sander you have chosen has the option of the dust removal accessory.
  7. Spindle sanders are perfect for smoothing curves. Available both by hand and table, the spindle sanders offer an excellent finish after taking large amounts of material with a belt sander. The characteristics sought on a self-supporting spindle sander are storage of sanding drums/pins, emergency stop, well-machined table and dust collection port. Features to be searched on an edge sander include the unique lobe adjustment tension, excellent machined steel plate, easy access controls, manufacturing, easy-to-use belt changes.
  8. Drywall sander is specifically used to finish sand drywall. Using the drywall electric sander gets 3-4 times faster than hand sanding. Drywall sanders also have a dust collection system to suck up most of the fine, lousy dust that seems to cover everything in the area. The Porter-Cable 7800 is a long-action sander with variable speed. This sander is long enough to sand a 10-foot ceiling of the ground and light (£ 8). The 1-1 / 4-inch suction hose measures 13 feet long, so an operator can cover many floors without having to move the vacuum. At $ 430, it’s a little expensive for such a tool, but it’s worth it when you take into account all the time you’ll save.

Share this post

About the author

Leave a Reply